09-11-2014 11:52 AM
I got the following error all of a sudden. It appears 2 last interfaces have hardware failure. Anyone has experience recovering from this besides sending back the switch? Rebooting the switch and clearing logs in the bootflash did help.
2010 Jun 24 17:39:02 switch %$ VDC-1 %$ %NOHMS-2-NOHMS_DIAG_ERROR: Module 1: Runtime diag detected major event: Fabric port failure fc1/31
2010 Jun 24 17:39:02 switch %$ VDC-1 %$ %NOHMS-2-NOHMS_DIAG_ERROR: Module 1: Runtime diag detected major event: Fabric port failure fc1/32
switch# show interface brief
--------------------------------------------------------------------------------
Ethernet VLAN Type Mode Status Reason Speed Por
t
Interface Ch
#
--------------------------------------------------------------------------------
Eth1/1 1 eth access down Link not connected 10G(D) --
Eth1/2 1 eth access down Link not connected 10G(D) --
Eth1/3 1 eth access down Link not connected 10G(D) --
Eth1/4 1 eth access down Link not connected 10G(D) --
Eth1/5 1 eth access down Link not connected 10G(D) --
Eth1/6 1 eth access down Link not connected 10G(D) --
Eth1/7 1 eth access down SFP not inserted 10G(D) --
Eth1/8 1 eth access down SFP not inserted 10G(D) --
Eth1/9 1 eth access down SFP not inserted 10G(D) --
Eth1/10 1 eth access down Link not connected 10G(D) --
Eth1/11 1 eth access down Link not connected 10G(D) --
Eth1/12 1 eth access down Link not connected 10G(D) --
Eth1/13 1 eth access down Link not connected 10G(D) --
Eth1/14 1 eth access up none 10G(D) --
Eth1/15 1 eth access up none 10G(D) --
Eth1/16 1 eth access up none 10G(D) --
Eth1/17 1 eth access up none 10G(D) --
Eth1/18 1 eth access down SFP not inserted 10G(D) --
Eth1/19 1 eth access down SFP validation failed 10G(D) --
Eth1/20 1 eth access down SFP not inserted 10G(D) --
Eth1/21 1 eth access down SFP not inserted 10G(D) --
Eth1/22 1 eth access down SFP not inserted 10G(D) --
Eth1/23 1 eth access down SFP not inserted 10G(D) --
Eth1/24 1 eth access down SFP not inserted 10G(D) --
Eth1/25 1 eth access down SFP not inserted 10G(D) --
Eth1/26 1 eth access down SFP not inserted 10G(D) --
Eth1/27 1 eth access down SFP not inserted 10G(D) --
Eth1/28 1 eth access down SFP not inserted 10G(D) --
Eth1/29 1 eth access down SFP not inserted 10G(D) --
Eth1/30 1 eth access down SFP not inserted 10G(D) --
Eth1/31 1 eth access down Hardware failure 10G(D) --
Eth1/32 1 eth access down Hardware failure 10G(D) --
06-12-2017 09:08 PM
It looks like bug: CSCur03134
I too encountered this fault. Upon reboot of secondary FI(that had the alert) alert cleared from the UCS Manager. Later during the day the issue reappeared.
Replacing the FI eventually resolved the issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: