Is there any way to force the Nexus to process switch packets? We are dealing with a case where the 7000 appears to get the mac forwarding addresses confused (ver 4.2.4). If you use something like ping with record option, packets route successfully. I've tried an acl with permit ip any any log, but that doesn't seem to force process switching either. Any ideas appreciated. We can sacrifice performance for a working config right now. I have case 614566897 open.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...