I have a deployment with 2 x Nexus 7009. Both N7K's have dual supervisor modules.
Each Supervisor Module is connected to alternate management switches.
Supervisor 1 is connected to Management Switch 1
Supervisor 2 is connected to Management Switch 2
In the event of a failure of Management Switch 1, access to Supervisor 1 is lost and in turn all access to the N7K.
Is there any method of achieving connectivity to the Active Supervisor (1) when this scenario occurs.Can connectivity be achieved via the Standby Supervisor (other than making the Standby Supervisor the Active Supervisor).
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...