Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Nexus5010 Chassis Interface Inventory and typ of module

Hi Support,

All  other cisco Switch models  sh inventory commands will show the sl number  and type  of the module inserted on the switch ports   any such commands available on  Nexus5010 switch to know the  sl number and media type  .

OS Version :version 4.0(1a)N1(1)

Regards

Vineeth Mohan

  • Server Networking
4 REPLIES
Silver

Nexus5010 Chassis Interface Inventory and typ of module

Vineeth,

show module should help you.

./Abhinav

New Member

Nexus5010 Chassis Interface Inventory and typ of module

Hi Abhinav ,

I have tried that frist but it  was not helpful for me .  Sh module is only giving the below out put .

Kindly share  if you have any  feedback  .

Rgeards

Vineeth

New Member

Nexus5010 Chassis Interface Inventory and typ of module

Hi Abhinav ,

Thanks for your help  . How  ever  I have got a command which helped me to find the sl number of the modules

"show interface ethernet 1/1 transceiver details"

Regards

Vineeth

Cisco Employee

Nexus5010 Chassis Interface Inventory and typ of module

You can use command "show interface ethernet x/y", it will give you following output:

Nexus# sh int e 1/2 transceiver

Ethernet1/2

    transceiver is present

    type is 10Gbase-SR

    name is CISCO-FINISAR  

    part number is FTLX8571D3BCL-CS

    revision is E  

    serial number is FNSXXXXXXXX    

    nominal bitrate is 10300 MBit/sec

    Link length supported for 50/125um fiber is 80 m

    Link length supported for 50/125um fiber is 300 m

    Link length supported for 62.5/125um fiber is 20 m

    cisco id is --

    cisco extended id number is 4

662
Views
8
Helpful
4
Replies