I have a problem my frame-relay point-to-point network: Actually, the primary site equipment is a Cisco 2801 ISR and the remote site is Cisco 1005 and with this deployment full service working satisfactory but when I do change the 1005 router por Cisco 1841 one at remote site (technological innovation) any service of the network no working. The configuration on the routers 1005 and 1841 are same with the normal exceptions in OS. What can be happened it? At primary site and the remote site there are AS-400 platform.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...