The 3750 is a device that is stackable via a connector on the backplane. This means that the communication between switches in a stack is considerably faster (32Gb vs 1Gb). I also think it is the most versatile of the two, at least it is the most expensive one. If you do not need the stacking feature you will be cheaper off with the 3560.
The answer to your second question is perhaps somewhat disappointing. You may stop searching because as far as I know, 10Gb speeds are only available via fiber, not on UTP.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...