Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Routers Vs 3745 token-Ring

I am a beginner on technology Cisco, here my problem. Today I have 2 3745 with a different address Token Ring, I replace this old technology by a router Cisco 72XX and a card CPA, I hope that you include/understand me. Now, I use card CPA. How to make to keep the same SAP addresses on the 2 addresses Token Ring of the 3745, while using on the Cisco the function "lan Token Ring". Which are the commands to be activated on the router to describe this function

  • Server Networking
1 REPLY
New Member

Re: Routers Vs 3745 token-Ring

Hi Francis, The quick answer is that the SAPs are defined and activated in "XCA" nodes on the mainframe. You may want to have a look at -

http://www.cisco.com/en/US/partner/tech/tk331/tk332/technologies_tech_note09186a0080094248.shtml

to walk you through the process.

Rgds, Dan

149
Views
0
Helpful
1
Replies