Having issues with a migration of servers that are load balanced using SLB from a pair of 6500's to a pair of N7K's runing vPC.
Currently the VIP and reals are all configured on the 6500's and everything works OK. The SLB configuration including the VIP and real address configuration is remaining on the 6500's and the server VLAN SVI hosting the real server IP addresses is moving to the N7K's which are running vPC.
Everything looks OK and the real servers addresses are routable from the 6500 but SLB doesnt work. Would directed mode NAT be a possible solution in this scenario???
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...