Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

static netbios cache entry

Hello

I have two routers connected over dlsw, each router is connected to a

token ring. If i want to configure a static cache entry, which command sould

i use netbios name-cache ...........

or

dlsw icanreach netbios-name ...........

Thanks for your help

Louis

1 REPLY
New Member

Re: static netbios cache entry

NetBios Name-Caching is an older feature which was used in conjunction with RSRB

and Local Acknowledgement. The cache that DLSw+ keeps for NetBios names is a

completely different cache, optimized for DLSw+ operation. By configuring 'dlsw

icanreach netbios-name ...' on a router, it advertises to its peers via capabilities exchange

that it has a route to the NetBios station in question, thereby creating static remote entries

in each of its remote-peers. This is the configuration you will most likely want to use.

320
Views
0
Helpful
1
Replies
CreatePlease to create content