I installed and finished the configurations the ESXi with some Cisco Appliances into the UCS C260 Server with 2 x 500GB Hard Disk RAID 1, but now I want to transfer the 2 x 500GBwith data to a new UCS C220 server.
Actually, I don't have the 2 extra HD to do that.
Can I just plug and paste the HD to the new C220 Server?
According to the "Restoring RAID Configuration After Replacing a RAID Controller", how can I import the RAID configuration during the first boot sequence? That mean I have to export the RAID configuration from the C260 and import that to the new C220 server?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...