Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

VIP Red

UCS Firmware upgrade 2.1.1f to 2.1.2a

                   We tried to upgrade UCS firmware from 2.1.1f to 2.1.2a, initially with autoinstall infrastructure

                    however, the system hangs with IOM upgrade !

                    any advice how to escape from the autoinstall ?

                    anybody having had similar issues ?

Everyone's tags (4)
2 REPLIES
New Member

UCS Firmware upgrade 2.1.1f to 2.1.2a

Hi,

same here but from 2.1.1b to 2.1.2a with IOM-a on Chassis-1.

The other IOM and second chassis did it just great...

/chassis # show firmware |egrep -A 10 "IOM"

    IOM 1 (Fabric A):

        Running-Vers: 2.1(1b)

        Package Vers: 2.1(1b)A

        Update-Status: Ready

        Activate-Status: Pending Next Boot

    IOM 2 (Fabric B):

        Running-Vers: 2.1(2a)

        Package Vers: 2.1(2a)A

        Update-Status: Ready

        Activate-Status: Ready

No reset or anything has helped so far. Another message will be this one:

/chassis/iom* # show fault

Major     F0401    2013-07-16T11:06:38.412    612542 IOM 1/1 (A) current connectivity does not match discovery policy or connectivity is unsupported: unsupported-connectivity

Any advice would be very helpfull.

Timo

VIP Red

UCS Firmware upgrade 2.1.1f to 2.1.2a

I solved the problem with this painful steps

1) I only have one chassis -> decommission chassis

2) this resulted that the remaining steps in the infrastructure autoinstall got finished properly (both FI's)

3) Recommission chassis

4) manually firmware upgrade and activate IOM -> IOM are in pending next boot

5) reset IOM's

btw. one UCS domain (with 1 chassis) was upgrading ok, the other failed.

Any advice to get out of a hanging autoinstall sequence ?

Thanks

Walter.

454
Views
0
Helpful
2
Replies