05-24-2012 03:15 AM
Has anyone had an issue with deleting a virtual supervisor module on a 1010?
A-TPL-NXS01# show virtual-service-blade summary
-------------------------------------------------------------------------------
Name Role State Nexus1010-Module
-------------------------------------------------------------------------------
vsm-1 PRIMARY VSB POWERED ON Nexus1010-PRIMARY
vsm-1 SECONDARY VSB POWERED ON Nexus1010-SECONDARY
vsm-2 PRIMARY VSB NOT PRESENT Nexus1010-PRIMARY
vsm-2 SECONDARY VSB NOT PRESENT Nexus1010-SECONDARY
vsm-2 PRIMARY VSB NOT PRESENT Nexus1010-PRIMARY
vsm-2 SECONDARY VSB NOT PRESENT Nexus1010-SECONDARY
vsm-2 PRIMARY VSB NOT PRESENT Nexus1010-PRIMARY
vsm-2 SECONDARY VSB NOT PRESENT Nexus1010-SECONDARY
vsm-2 PRIMARY VSB NOT PRESENT Nexus1010-PRIMARY
vsm-2 SECONDARY VSB NOT PRESENT Nexus1010-SECONDARY
A-TPL-NXS01# login virtual-service-blade vsm-2
virtual-service-blade vsm-2 is not active
A-TPL-NXS01# conf t
Enter configuration commands, one per line. End with CNTL/Z.
A-TPL-NXS01(config)# virtual-service-blade vsm-2
A-TPL-NXS01(config-vsb-config)# no shut
ERROR: internal error; Could not retrieve vb information
A-TPL-NXS01(config)# no virtual-service-blade vsm-2
ERROR: virtual-service-blade vsm-2 does not exist
There are no issues with vsm-1 & this is deployed on an active/standby pair of 1010's
Thanks
Colin
05-24-2012 10:23 AM
Hello Colin,
I suspect your Nexus1010 is running SP1.1 or SP1.2 and you are encountering CSCtq43363. The workaround is to deleve a VSB (as you have already done) then relead the N1010, then delete another. You will need to delete vsm-2 and reload a total of 4 times to clean up the system. I would then suggest upgrading the N1010s to SP1.4a.
Matthew
05-25-2012 01:16 AM
Matthew,
Thanks for the prompt reply, we have version 4.2(1)SP1(3) & are running an active/standby pair of 1010's.
I will give that a try when i can arrange some downtime.
Colin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide