The "vem status" on each ESXi host states that VEM modules are installed. When I go to the 1KV and do a "show mod" I do not see them as being registered.
N1KV-VSM-01# show mod
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 0 Virtual Supervisor Module Nexus1000V active *
2 0 Virtual Supervisor Module Nexus1000V ha-standby
Mod Sw Hw
--- ------------------ ------------------------------------------------
1 4.2(1)SV2(2.1a) 0.0
2 4.2(1)SV2(2.1a) 0.0
Mod Server-IP Server-UUID Server-Name
--- --------------- ------------------------------------ --------------------
1 10.170.50.50 NA NA
2 10.170.50.50 NA NA
* this terminal session
N1KV-VSM-01# 2013 Nov 7 14:34:27 N1KV-VSM-01 %VMS-5-DVS_HOSTMEMBER_INFO: A host with name=[srvlavesx002.mwp.corp.com] and uuid=[c4b52629-fbe7-e211-0000-000000000005] is added to the dvs. The host is not found as a module in the VSM configuration.
I am not sure what the error is. How can I verify that my Control VLANs are working properly?