Virtual Machines - SAN replication to DR site, bring up OS in different net
We have an Equalogic SAN being replciated to our DR site via a MPLS connection. ON the SAN we have multiple virtual machines running. In case of DR, we want to bring up those machines at DR site, the problem is, that site is in a different subnet, when we bring up the Windows Servers, they have the prevous IP information defined in them...Anyone else ran into this? Looking for an automated solution as opposed to going to console and changing IPs/subnets/GWs...
Re: Virtual Machines - SAN replication to DR site, bring up OS i
Hello - Cisco addresses this with Data Center Interconnect solutions that provide the ability to extend VLANs and Subnets onto any number of other Data Centers without the burden of L2 bridging technology (aka STP). You may want to read the following Layer 2 Data Center Extension White Paper for more information.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...