VLAN configuration (or any experience) with 10G Virtual Connect
I was wondering if anybody had experience with connecting HP Virtual Connect @ 10Gbps in a Cisco data centre? Specifically I'm wondering what others have done in terms of VLAN configuration in terms of numbers and requirements e.g. Heartbeat, Public facing, iLo/RIB etc.
My set-up is a pair of 6509 running Sup720 10G (not running VSS), 10G line cards. I have a pair of c7000 chassis, each one has two VC modules with 2 x 10Gbps to each 6500.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...