Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vPC between nexus 7000 and BNT FABRIC SWITCH 10GB in IBM Bladecenter

Dears ,

any one can help me in connecting the following

BNT 10 fabric switch with Nexus 7000 using port channel

how to configure it as port channel in BNT

design as attached

 

7 REPLIES

hello,the side of blade

hello,

the side of blade server, whare are the configuration of LACP? becuase in the attachment i don't look the LACP active work.

you need enable LACP on side of blade switch.

/c/l2/lacp/port INT1
        mode active
/c/l2/lacp/port INT2
        mode active
/c/l2/lacp/port INT3
        mode active

 

this a example.

 

New Member

sorry neya, the Core switch

sorry neya,

 

the Core switch config is as below

CORE 1

interface Ethernet1/3

  description TO-IBM-APP1

  switchport mode trunk

  channel-group 26

  no shutdown

 

interface Ethernet1/4

  description TO-IBM-APP2

  switchport mode trunk

  channel-group 27

  no shutdown

 

 

interface port-channel26

  description TO-IBM-APP1

  switchport mode trunk

  vpc 26

 

interface port-channel27

  description TO-IBM-APP2

  switchport mode trunk

  vpc 27

 

CORE 2

 

interface Ethernet1/3

  description TO-IBM-APP1

  switchport mode trunk

  channel-group 26

  no shutdown

 

interface Ethernet1/4

  description TO-IBM-APP2

  switchport mode trunk

  channel-group 27

  no shutdown

 

 

interface port-channel26

  description TO-IBM-APP1

  switchport mode trunk

  vpc 26

 

interface port-channel27

  description TO-IBM-APP2

  switchport mode trunk

  vpc 27

weyy, what part do you need

weyy,

 

what part do you need to complete that implementacion?

 

 

New Member

hi, i configured on one

hi,

 

i configured on one switch lacp, the link is up and running

 

but while configuring on the second switch , the ports goes up and down and disconnecting

New Member

Dear Neya, The LACP config

Dear Neya,

 

The LACP config worked for the connectivity between the core.

is it possible to trunk the internal port for multiple vlans , as the blade servers have virtual OS

The configuraton side of core

The configuraton side of core 1 and core 2 is fine, but you need to enable LACP but blade switch, I don't look the lacp active in the configuration enable lacp on interface the blade switch.
New Member

on core side should we change

on core side should we change mode of channel group to active or no need

 

 

and for blade sw do we need to add the admin key or no need

/c/l2/lacp/port INT1
        mode active

/c/l2/lacp/port INT2
        mode active

 

418
Views
0
Helpful
7
Replies
CreatePlease login to create content