08-02-2014 11:06 PM
Dears ,
any one can help me in connecting the following
BNT 10 fabric switch with Nexus 7000 using port channel
how to configure it as port channel in BNT
design as attached
08-04-2014 11:05 AM
hello,
the side of blade server, whare are the configuration of LACP? becuase in the attachment i don't look the LACP active work.
you need enable LACP on side of blade switch.
/c/l2/lacp/port INT1
mode active
/c/l2/lacp/port INT2
mode active
/c/l2/lacp/port INT3
mode active
this a example.
08-05-2014 05:43 AM
sorry neya,
the Core switch config is as below
CORE 1
interface Ethernet1/3
description TO-IBM-APP1
switchport mode trunk
channel-group 26
no shutdown
interface Ethernet1/4
description TO-IBM-APP2
switchport mode trunk
channel-group 27
no shutdown
interface port-channel26
description TO-IBM-APP1
switchport mode trunk
vpc 26
interface port-channel27
description TO-IBM-APP2
switchport mode trunk
vpc 27
CORE 2
interface Ethernet1/3
description TO-IBM-APP1
switchport mode trunk
channel-group 26
no shutdown
interface Ethernet1/4
description TO-IBM-APP2
switchport mode trunk
channel-group 27
no shutdown
interface port-channel26
description TO-IBM-APP1
switchport mode trunk
vpc 26
interface port-channel27
description TO-IBM-APP2
switchport mode trunk
vpc 27
03-24-2015 10:43 AM
weyy,
what part do you need to complete that implementacion?
08-25-2014 05:24 AM
hi,
i configured on one switch lacp, the link is up and running
but while configuring on the second switch , the ports goes up and down and disconnecting
09-09-2014 02:09 AM
Dear Neya,
The LACP config worked for the connectivity between the core.
is it possible to trunk the internal port for multiple vlans , as the blade servers have virtual OS
08-05-2014 09:46 AM
08-06-2014 12:21 AM
on core side should we change mode of channel group to active or no need
and for blade sw do we need to add the admin key or no need
/c/l2/lacp/port INT1
mode active
/c/l2/lacp/port INT2
mode active
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: