Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Which command on a Catalyst 6000 has the same function as the Catalyst 5000 command <b>set option errport enable</b>?

2 REPLIES
Anonymous
N/A

Re: Which command on a Catalyst 6000 has the same function as th

The command is the same for both switches, but you need Catalyst software version 5.2.3 or later on the Catalyst 6000/6500 to execute the command. The command must be entered completely in the command line interface (CLI) because there is no CLI help for this command.

Cisco Employee

Re: Which command on a Catalyst 6000 has the same function as th

Set Option Errport actually masks the problem by not errdisabling the ports. Best thing to do to would be to see why the port is taking errors in the first place. Also this command is for all switchports and not per port or per module. We have a document on CCO which explains errdisable in detail

http://www.cisco.com/warp/public/473/20.html

To troublehoot the actual problem, the following pages should help

http://www.cisco.com/warp/public/473/53.shtml

http://www.cisco.com/warp/public/473/46.html

222
Views
0
Helpful
2
Replies
CreatePlease to create content