Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

X.25 HNAS connection

Hello,

I have to do a HNAS connection between a Cisco router and an IBM mainframe. I have to use XOT, but I have never done a configuration like this and documentation is not clear enough.

Can anybody share a configuration or give me some clues? How do x.25 routes look like (I assume there's no x.121 address in the IBM side?

Regards,

Ruben

3 REPLIES
New Member

Re: X.25 HNAS connection

Hi,

I've previously worked on X.25 host enviroments. May I know what u mean by X.25 HNAS? Are you trying to configure this directly to an IBM MF? WHat's the MF model, OS and network platform availble?

New Member

Re: X.25 HNAS connection

Hi Ruben,

You can connect HNAS and the cisco router. You may check out the following URL for the XoT. You may use the first configuration for your setup.

http://www.cisco.com/en/US/customer/tech/tk713/tk730/technologies_configuration_example09186a0080093c0e.shtml

http://www.cisco.com/en/US/customer/tech/tk713/tk730/technologies_configuration_example09186a0080093c0e.shtml

Thanks,

Hakan.

New Member

Re: X.25 HNAS connection

Hello Hakan,

there's one thing that I don't understand and I don't know how to configure...

I assume that you create a x25 route pointing to a x.121 address and then specify the xot remote ip address, but in this case, tha ibm host has a x.121 address??? How should I create the route?

Thanks,

Ruben

255
Views
0
Helpful
3
Replies