Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

X.25 problem

We are triyng to use X.25 but in the IBM 3745 we do not see the packets...the sh debug x25 output is:

[172.29.11.254,13554/172.17.2.253,1998]: XOT I P/Inactive Call (27) 8 lci 1

From (9): 368104980 To (8): 36111111

Facilities: (6)

Packet sizes: 128 128

Window sizes: 2 2

Call User Data (7): 0xC3010000 (qllc)

Serial0/1: X.25 O R1 Call (21) 8 lci 1000

From (9): 368104980 To (8): 36111111

Facilities: (0)

Call User Data (7): 0xC3010000 (qllc)

Serial0/1: X.25 I R1 Clear (5) 8 lci 1000

Cause 147, Diag 88 (DTE:Local procedure error/Unknown diagnostic)

[172.29.11.254,13554/172.17.2.253,1998]: XOT O P3 Clear (5) 8 lci 1

Cause 147, Diag 88 (DTE:Local procedure error/Unknown diagnostic)

[172.29.11.254,13554/172.17.2.253,1998]: XOT I P6 Clear Confirm (3) 8 lci 1

Serial0/1: X.25 O R1 Clear Confirm (3) 8 lci 1000

and the config. is as folows:

x25 routing

x25 route .* interface serial0/1

interface Serial0/1

bandwidth 64

no ip address

encapsulation x25 dce

no ip mroute-cache

x25 ltc 1000

x25 htc 1399

clockrate 64000

end

I cannot see what is happening...in another system is working with the same configuration.

Can someone help me ?

3 REPLIES
New Member

Re: X.25 problem

Hi Algis,

Could you please describe the end to end topology ? Is the dlsw involved?

Thanks,

Hakan.

New Member

Re: X.25 problem

Thanks, but finaly was a misstake in the x25 route.

New Member

Re: X.25 problem

Where are your mapping statements? Is this a complete config?

199
Views
0
Helpful
3
Replies
CreatePlease to create content