The sdlc partner mac address would be the mac address you define on OSA Fenet (just like the mac address you define on the CIP adapter). The switch major node definitions should be same as the ones you're using now.
Cisco's X.25 IOS support is not a replacement for FEP NPSI. Cisco supports (1) X.25 over TCP/IP (XOT), which supports X.25 sessions between two native X.25 endpoints across a router network, and (2) QLLC, which supports router transport of SNA over X.25. PCNE is not supported on Cisco routers.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...