Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

config PIM error

When i config "ip pim sparse-mode" with interface e0/1 , the error display ...

I want to know why like this, how can i solve it ?  help me ,thanks..

R9(config-if)#int e0/1

R9(config-if)#ip pim sparse-mode

*Mar  5 07:17:10.990: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

*Mar  5 07:17:10.990: %MFIB_MRIB-3-FAILED_TABLE_OPEN: In table 0xB5A4FC10 (0x0/Default) with Failed(10000000)

*Mar  5 07:17:12.122: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 9.9.109.9 on interface Ethernet0/1

*Mar  5 07:17:21.042: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:31.142: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:41.262: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:41.262: %MFIB_MRIB-3-FAILED_TABLE_OPEN: In table 0xB5A4FC10 (0x0/Default) with Failed(10000000)

R9(config-if)#

*Mar  5 07:17:51.394: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:18:01.402: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:18:11.474: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:18:11.474: %MFIB_MRIB-3-FAILED_TABLE_OPEN: In table 0xB5A4FC10 (0x0/Default) with Failed(10000000)

R9(config-if)#

*Mar  5 07:18:14.494: %PIM-5-NBRCHG: neighbor 9.9.109.10 UP on interface Ethernet0/1

*Mar  5 07:18:14.494: %PIM-5-DRCHG: DR change from neighbor 9.9.109.9 to 9.9.109.10 on interface Ethernet0/1

R9(config-if)#

*Mar  5 07:18:21.582: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#int e0/1

R9(config-if)#ip pim sparse-mode

*Mar  5 07:17:10.990: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:10.990: %MFIB_MRIB-3-FAILED_TABLE_OPEN: In table 0xB5A4FC10 (0x0/Default) with Failed(10000000)

R9(config-if)#

*Mar  5 07:17:12.122: %PIM-5-DRCHG: DR change from neighbor 0.0.0.0 to 9.9.109.9 on interface Ethernet0/1

R9(config-if)#

R9(config-if)#

R9(config-if)#  

*Mar  5 07:17:21.042: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:31.142: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:41.262: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:17:41.262: %MFIB_MRIB-3-FAILED_TABLE_OPEN: In table 0xB5A4FC10 (0x0/Default) with Failed(10000000)

R9(config-if)#

*Mar  5 07:17:51.394: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:18:01.402: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:18:11.474: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

*Mar  5 07:18:11.474: %MFIB_MRIB-3-FAILED_TABLE_OPEN: In table 0xB5A4FC10 (0x0/Default) with Failed(10000000)

R9(config-if)#

*Mar  5 07:18:14.494: %PIM-5-NBRCHG: neighbor 9.9.109.10 UP on interface Ethernet0/1

*Mar  5 07:18:14.494: %PIM-5-DRCHG: DR change from neighbor 9.9.109.9 to 9.9.109.10 on interface Ethernet0/1

R9(config-if)#

*Mar  5 07:18:21.582: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE

R9(config-if)#

R9(config-if)#

Comments
New Member

who can help me ?

1157
Views
0
Helpful
1
Comments