Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

some trouble with isg

at one time, in all accounting packets, fields





have only zero. anyone seen it?

Frame 175: 309 bytes on wire (2472 bits), 309 bytes captured (2472 bits)

Ethernet II, Src: Nortel_76:ab:00 (00:14:0d:76:ab:00), Dst: QuantaCo_57:6d:fe (00:23:8b:57:6d:fe)

Internet Protocol, Src:x.x.x.x (x.x.x.x), Dst: y.y.y.y (y.y.y.y)

User Datagram Protocol, Src Port: icmpd (5813), Dst Port: sa-msg-port (1646)

Radius Protocol

Code: Accounting-Request (4)

Packet identifier: 0xd4 (212)

Length: 267

Authenticator: 4dae10578e87c100fe5df46d02f84cde

[The response to this request is in frame 176]

Attribute Value Pairs

AVP: l=18 t=Acct-Session-Id(44): 5F4080000018F0EA

AVP: l=6 t=Framed-Protocol(7): PPP(1)

AVP: l=14 t=Vendor-Specific(26) v=Cisco(9)

AVP: l=42 t=Vendor-Specific(26) v=Cisco(9)

AVP: l=16 t=User-Name(1): 404a.0379.6fc4

AVP: l=12 t=Vendor-Specific(26) v=Cisco(9)

AVP: l=12 t=Vendor-Specific(26) v=Cisco(9)

AVP: l=6 t=Acct-Input-Packets(47): 0

AVP: l=6 t=Acct-Output-Packets(48): 0

AVP: l=6 t=Acct-Input-Octets(42): 0

AVP: l=6 t=Acct-Output-Octets(43): 0

AVP: l=6 t=Acct-Session-Time(46): 311

AVP: l=6 t=Acct-Status-Type(40): Alive(3)

AVP: l=6 t=Framed-IP-Address(8): x.x.x.x

AVP: l=6 t=NAS-Port-Type(61): Virtual(5)

AVP: l=18 t=Vendor-Specific(26) v=Cisco(9)

AVP: l=6 t=NAS-Port(5): 0

AVP: l=12 t=NAS-Port-Id(87): 0/0/0/2186

AVP: l=6 t=Service-Type(6): Framed(2)

AVP: l=6 t=NAS-IP-Address(4):x.x.x.x

AVP: l=6 t=Event-Timestamp(55): Apr 20, 2012 12:31:55.000000000 MSK

AVP: l=19 t=NAS-Identifier(32): BAL-MKS_BAL-ASR1k

AVP: l=6 t=Acct-Delay-Time(41): 0

Version history
Revision #:
1 of 1
Last update:
‎04-20-2012 02:26 AM
Updated by:
Everyone's tags (3)