Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

I am not able to ping device attached to the opposite interface of the router

Hi Guys

I am not able to ping device attached to the opposite interface of the router

When I am trying to ping the address 10.30.0.84 of laptop attached to Gi0/1 from the laptop attached to interface to interface gi0/2 - not able

Able to ping 172.22.0.1 and 10.30.0.72 interfaces

What is the problem ? Configuration is attached

interface GigabitEthernet0/1
 ip address 10.30.0.72 255.255.255.224
 no ip route-cache
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
 no mop enabled
!
interface GigabitEthernet0/2
 ip address 172.22.0.1 255.255.255.0
 no ip route-cache
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
!
interface GigabitEthernet0/3
 no ip address
 no ip route-cache
 shutdown
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
!
ip default-gateway 10.30.0.65
ip route 0.0.0.0 0.0.0.0 10.30.0.65
ip route 172.22.0.0 255.255.255.0 GigabitEthernet0/1 10.30.0.65
ip http server
ip http authentication local
ip http secure-server
!

Regards

Mike

1 REPLY
Silver

Hi Mike,

Hi Mike,

Have you checked if the IP is populated on the ARP table (Show arp).

If possible try to disable the windows firewall  and antivirus and try again, sometimes this software cause issues. 

Hope it helps

-Randy-

23
Views
0
Helpful
1
Replies
CreatePlease to create content