Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connecting NSS 324 to two networks.

Can the NSS 324 support two network segments? I work from home, so I have my network split into a home segment and work segment. I'd like to be able to share files such as photos from either network. How can this be accomplished?

Thank you.

Everyone's tags (1)
1 REPLY
Gold

Connecting NSS 324 to two networks.

Hi Seth,

Thank you for posting. You can give each ethernet port an IP address in a different subnet by going to Administration-> Network. The NAS can only have one Default Gateway.

Example:

Ethernet 1:

IP Address: 192.168.1.200

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1 (Router)

Ethernet 2:

IP Address: 10.1.1.10

Subnet Mask: 255.255.255.0

Gateway: None

You will be able to access the NAS from either the 192.168.1.x network or the 10.1.1.x network. The NAS will use 192.168.1.1 to reach the internet.

Please reply if you have any questions.

865
Views
0
Helpful
1
Replies