Each drive can only be placed in one RAID. You can have multiple RAIDs on the a device. So a 6-bay NSS326 could support two 3-drive RAID 5 configurations. Or three 2-drive RAID1. Or one 4-drive RAID5/6 and one 2-drive RAID0. Obviously lots of combinations that you could setup with the 6-bay unit.
The Smart Storage series supports RAID 0, 1, 5, and 6. RAID 10 is not supported.
Time Machine Backup on NSS300 Smart Storage Series
This document explains the steps for Time Machine Backup. The Network Attached Storage (NAS) is used as one of the destinations for the backup of files. It is a file-level ...
Basic and Advanced System Reset on NSS300 Series Smart Storage
The NSS devices have two types of System Resets: Basic and Advanced. An understanding of both of these resets will allow the user to recover from unpredictable si...
Expansion of Disk Capacity of RAID 5 on the NSS300 Series (Except NSS322)
RAID stands for Redundant Array of Independent Disks. RAID 5 combines three or more disks in a way that shields the data against loss of any one disk. ...