Now that we have both the twonky media server, and optware, we can add transcoding to TwonkyMedia Server.
Be forewarned, you could probably mess up your NSS if you don't know what you are doing, or maybe even if you do.
-- First install the optware package. (Use the links at the top of the forums to get to the pkg)
-- Then make sure it's enabled (go through the admin, view the package, and check the enabled box).
-- Then log in via ssh (you will have to add this via the admin as well). If you're on a non-linux environment, you can use putty or some other terminal client.
-- Once logged in, run 'ipkg update', then 'ipkg install ffmpeg' -- This will update the optware list, and then install ffmpeg (required for transcoding).
-- Then we need to edit the location file for this. The file is located at '/mnt/ext/opt/twonkymedia/cgi-bin/ffmpeg.location'. You can edit it using vi, or some other command line file. Remove what's in it, and put '/usr/bin' in it, save and close the file.
-- Make sure twonky media server is enabled (Called UPnP server in the admin)
-- Go to the web admin for it (usually your NAS IP and port 9000, so http://nasip:9000 )
-- Click on TwonkMedia Settings
-- Click on 'Network' under 'Advanced Setup'
-- Click the 'Restart Server' button
-- After it restarts, under advanced settings again, choose 'Transcoding'
-- Choose the transcoding options you want!
Hopefully this works for anyone who's trying to do this. Optware has opened a lot of doors for things like this, so maybe I'll get some more guides out there.
Good morning,I am an Engineer from Spain. A free-lance.I am doing a
project and I would want your proposal for the Network .I have attached
a drawing of it.Now, I do not need a commercial bid. Only I want to know
the electronics device that I need and bro...
Do you visit the Cisco Software Download Center for Firmware/Software
Updates?If so, we need your help with an upcoming User Experience Study
as we seek to make improvements.Prefer participants with the following
qualifications:Experience with supporting ...
Hi,Since tomorrow morning my web server isn't working. My firmware is up
to date(1.5.0).I try to reboot it and i use the firmware upgrade
process. I turn the web server on and off many times.Actually, there's
only 3 persons using the webserver and i don't...