If the NSS boxes are being used for storing survelliance footage in multiple sites and we want to connect from a central installation of the software - i.e. not requiring a PC onsite. Can this be done?
Hi. It's hard to understand what you are trying to accomplish. Can you explain further what you are trying to do at each site and what software/equipment is located at each site.
In general you could use Cisco Small Business Advanced Video Monitoring System (AVMS) http://www.cisco.com/go/avms as a centralized managment and viewing location. All of the cameras could be remote assuming you have enough bandwidth.
If you are trying to record camera video locally (FTP directly from the camera to a NAS) and then have a central Video Monitoring System play that video back... that use case is not supported in the AVMS software.
Time Machine Backup on NSS300 Smart Storage Series
This document explains the steps for Time Machine Backup. The Network Attached Storage (NAS) is used as one of the destinations for the backup of files. It is a file-level ...
Basic and Advanced System Reset on NSS300 Series Smart Storage
The NSS devices have two types of System Resets: Basic and Advanced. An understanding of both of these resets will allow the user to recover from unpredictable si...
Expansion of Disk Capacity of RAID 5 on the NSS300 Series (Except NSS322)
RAID stands for Redundant Array of Independent Disks. RAID 5 combines three or more disks in a way that shields the data against loss of any one disk. ...