Our NSS4000 performs very slow. We check the log files and see the below error message:
Apr 28 22:21:59 nas10 kernel: nfsd: request from insecure port (192.168.6.131:50003)!
Apr 28 22:22:30 nas10 last message repeated 3502 times
The 192.168.6.131 is the hpux WS. Not only this hpux WS has problems with the nas10, all the hpux WSs have a same problem ( once a week). I need to turn these WSs off, then turn them on and the problem disappear for 1 week. For windows and linux WSs, we dont have any problems with nss4000. Moreover, those hpuxs are aslo connected to Snap alliance and hp NAS servers and only the nss4000 has problems.
Please help to resolve the issue. I also contacted to cisco app., but they dont know how to solve it, they asked me to post my problem in this website.
Time Machine Backup on NSS300 Smart Storage Series
This document explains the steps for Time Machine Backup. The Network Attached Storage (NAS) is used as one of the destinations for the backup of files. It is a file-level ...
Basic and Advanced System Reset on NSS300 Series Smart Storage
The NSS devices have two types of System Resets: Basic and Advanced. An understanding of both of these resets will allow the user to recover from unpredictable si...
Expansion of Disk Capacity of RAID 5 on the NSS300 Series (Except NSS322)
RAID stands for Redundant Array of Independent Disks. RAID 5 combines three or more disks in a way that shields the data against loss of any one disk. ...