Has anyone had issue with the nss6100 keeps rebooting its self over and over. Power light blinks green then turns yellow then unit turns off. And also unit will boot if a drive is removed from bay 1 or bay 2. Unit is running the latest firmware 1.14-20.
You need to call technical support folk to help you. I am pretty sure the unit boot loader is the old version, it needed version B024 and this is something you can not see it because of security reason. Basically, there was an internal USB issue that fixed almost two years ago. Please call the Small Business Support Center at 1.866.606.1866 for help. Since you are Cisco employee, you can use Webex or internal email to resolve this problem.
Time Machine Backup on NSS300 Smart Storage Series
This document explains the steps for Time Machine Backup. The Network Attached Storage (NAS) is used as one of the destinations for the backup of files. It is a file-level ...
Basic and Advanced System Reset on NSS300 Series Smart Storage
The NSS devices have two types of System Resets: Basic and Advanced. An understanding of both of these resets will allow the user to recover from unpredictable si...
Expansion of Disk Capacity of RAID 5 on the NSS300 Series (Except NSS322)
RAID stands for Redundant Array of Independent Disks. RAID 5 combines three or more disks in a way that shields the data against loss of any one disk. ...