Ok , I seem to have an issue connecting to the internet through my E2500 Cisco router. Here is the information I received from my ISP :
Static IP : 18.104.22.168
Subnet : 255.255.255.252
Gateway : 22.214.171.124
DNS Server : 126.96.36.199
Alternate DNS : 188.8.131.52
The internet works fine when I hook up the line directly to my laptop . When I entered the same information on my router , it doesnt work.
I spoke to Cisco technical support and they told me that subnet 255.255.255.252 wont work with the Cisco Router and that I need to get it changed. However , my ISP tells me that it should work with a router. Any suggestions ?
Hi again Pravin, I am sorry for being insistent, as I told you in your past post, I am afraid that device is not Small Business equipment, so in this case if you want to receive more feedback about this issue you could post your issues in to Linksys forum. Please go to the link below.
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...