For Verizon ADSL, we usually use the Westell 6110F modems. They actually work correctly with Cisco products we deploy, such as the UC520 and 871, but this modem should work with other Cisco products. This modem should work with the WRV210.
For AT&T ADSL, a Netopia 3347 router is typically used, with the ADSL circuit connected to it. We often receive a block of public IP's from AT&T for AT&T circuits, and we enter in the correct static IP addresses in the Netopia ADSL router, and we also have NAT turned off on the Netopia 3347 router.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...