After installing RV042 We can no longer log in to bank account

[rubenrincones]

After installing the RV042, we can no longer log in to our business bank account.  My personal account works but it is a different bank.  Does anyone know what could be causing this?              

[linksysinfo]

are you using Dual Wan? ie two internet wan links?  you many need to bind the https protocol to one WAN port or the other.

[rubenrincones]

Yes we are using two wan links.  I have looked at binding the https protocol.  One question, is there a way to bind it without having to specify and ip address or ip range?  I want to bind all https protocols packets to one wan port.

[linksysinfo]

I'm sure there should be, i'm at work at present and cant remember off the top of my head about binding, will look when i get home...

I thought it was just a matter or binding the protocol to a wan port of your choice...

[linksysinfo]

Just looked into my RV042 v1...

The IP address range is the IP address of your local lan devices.  so if your using 192.168.1.0/24 as your DHCP scope then use

Tick either WAN1 or WAN2 (not both)

Service = https

192.168.1.2 to 192.168.1.254 as the IP range.

Direction - Upstream

Set your min/max rates

Tick "Enable"

Click on add to List

and Save Setting.

Rate Control 
Interface
: Check the WAN interface box, and the Rate Control Rule will apply to the selected interface (s). 

Service:
 Select the Service from the drop-down menu. If the Service you need to control is not in the drop down menu list, please click Service Management to add the Service. 
IP:
 Enter the IP Address or IP range you need to control. The default is zero which includes all internal IP addresses. 
Direction:
 Select 
Upstream
 for outbound traffic or 
Downstream
 for inbound traffic from the drop-down menu. 
Mini.
 Rate (Kbit/sec): Enter the Mini. Rate for guaranteeing bandwidth. 
Max
. Rate (Kbit/sec): Enter the Max Rate for limiting bandwidth. 
Enable
: Check the box to enable this Rate Control Rule.  
Add to list
: After set up the rule, click the Add to list button. The max entry is 100.

Simon

http://www.linksysinfo.org