Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

basic routing on 1712

Hi there,

I was hoping someone who knows at bit more about cisco routers could help me out with this....

I've been asked to look at linking up 3 separate networks (i.e. 3 separate subnets). I was hoping to use the companies cisco 1712 to do this.

The 1712 has just 1 network port and a 4 port switch.

I was hoping to create an IP address for each subnet i.e.

10.10.10.1

10.10.20.1

10.10.30.1

And have the router pass traffic through.

The company does not use VLANS and has no cisco switches.

I hope this makes sense! Can anyone tell me if this is possible and give me some pointers how to go about this?

TIA,

Al

125
Views
0
Helpful
0
Replies