Hello! The BEFVP41 is a "Linksys by Cisco" consumer router and this Support Community is for the Cisco Small Business Product support, so we don't suppot the Linksys by Cisco products on here. You can try the Linksys by Cisco site (www.linksysbycisco.com) but also I did a quick Google search for "BEFVP41 vpn setup" and found some interesting links and information, such as this one that may be of help to you.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...