What do people recommend in terms of connecting two SR520s through VPN? I am trying to connect a small business and a home office together. I tried to configure it through CCA 2.0, but am stuck with a Down-Negotiating problem. Any push in the right direction would be appreciated.
For instance, should I not even try to use CCA for this? Does anyone have experience connecting two of these routers in a site to site configuration? It seems that documentation is quite sparse on the subject. Any clarification would be helpful.
That's what I figured, and I've been doing that but have been having some issues. I upgraded to the newest CCA (2.0(1)), and I'm going to reset the routers to factory defaults and try again. I'll post back with my results. Thanks for responding.
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...