I would recommend you to use an access list on the router like this:
first deny the access:
Access list # deny ip 126.96.36.199 (wildcard) 188.8.131.52 (wildcard) Then do not forget to allow the access of the rest of connections as a final entry, so you do not have this problem. Access list # permit ip any any
and finnaly to assign the th access group to the interface.
interface (serial/fast/ethernet) #/# ip access-group # in
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...