Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

C887VA modem firmware via SNMP

The dutch isp KPN started to enroll VDSL vectoring, the problem is that several dsl-modem firmwares, embedded in the ios, don't support vectoring.

In the best case this means the line will train in on ADSL instead of VDSL but there are also a couple of firmware versions which are blacklisted and then the router will no longer establish a connection at all, so not via VDSL and not via ADSL.

I'm trying to use snmp to read-out the current firmware-version of the dsl-modem in the 700+ cisco 887va(g) routers we manage, but I can't find the oid.  Does anyone know if this oid exists and if so, what the oid is...?

 


 

Everyone's tags (1)
1 REPLY
New Member

I'm also looking for this

I'm also looking for this info. I was trying to find it under the entityMIBObjects, which should be the correct place to store this info but it is not there. Also the CISCO-IETF-VDSL-LINE-MIB is not supported on these kind of devices. So I guess there are only two options left, login each box or grep the configuration files.

128
Views
0
Helpful
1
Replies