Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cant See VG 224 Booting Process

Dear All,

Please help me out for this

i have one VG224 Router for which i forget password so to rest password i power off and power on it to enter in rommon mode by pressing Ctrl+Break.

But when i power on it it didn't show booting process and directly go on ROUTER> mode after 2-3 min from power on.

its booting process is not visible, even if i press Ctrl+break it didn't show me rommon mode,

so how should i solve this problem??

Regards

Ashish Mundhe

1 REPLY

Hello ashish,below are break

Hello ashish,

below are break key combinations.  Have you successfully used Ctrl break on other devices?

 

 

Standard Break Key Combinations

SoftwarePlatformOperating SystemTry This
HyperterminalIBM CompatibleWindows XP Ctrl-Break
HyperterminalIBM CompatibleWindows 2000 Ctrl-Break
HyperterminalIBM Compatible Windows 98 Ctrl-Break
Hyperterminal (version 595160)IBM Compatible Windows 95 Ctrl-F6-Break 
Kermit Sun WorkstationUNIX Ctrl-\l
Ctrl-\b 
MicroPhone Pro IBM Compatible Windows Ctrl-Break 
Minicom IBM CompatibleLinux Ctrl-a f
ProComm Plus IBM CompatibleDOS or Windows Alt-b
SecureCRTIBM CompatibleWindowsCtrl-Break
Telix IBM CompatibleDOSCtrl-End
TelnetN/AN/ACtrl-], then type send brk
Telnet to CiscoIBM CompatibleN/ACtrl-]
TeratermIBM CompatibleWindows Alt-b
TerminalIBM CompatibleWindows Break
Ctrl-Break
TipSun WorkstationUNIX Ctrl-], then Break or Ctrl-c
~#
VT 100 EmulationData GeneralN/AF16
Windows NTIBM CompatibleWindowsBreak-F5
Shift-F5
Shift-6 Shift-4 Shift-b (^$B)
Z-TERMINALMacAppleCommand-b
N/ABreak-Out BoxN/AConnect pin 2 (X-mit) to +V for half a second
Cisco to aux portN/AControl-Shft-6, then b
IBM CompatibleN/A

 

see link below(using rommon mode)

http://www.cisco.com/c/en/us/td/docs/routers/access/vg224/software/configuration/guide/scg/scgappc.html

 

15
Views
0
Helpful
1
Replies