I have pretty much googled my brains out trying to figure out why we can't access our Vitek DVR on our iPhones. It seems as if the TCP ports for 554 and 8081 work, but UDP ports do not. The public IP is 220.127.116.11 and the private DVR ip is 192.168.43.96. I'm fairly new to Cisco CLI, and I've opened ports on normal routers with ease. This, however, has got me beat. Can someone please help me out? The config is attached.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...