I have RV042 on my remote network, i have problems with VPN connection , user can connect to RV042 but only inside IPs that can ping from vpn user.
Is it any way to make the traffic from Rv042 will back to RV042 . maybe with nat.. in example below 192.168.5.100 is my lan IP from my DSL dhcp, and 172.27.0.20 ip on remote, traffic not back to my pc/vpn client, what i want is to translate 192.168.5.100 to RV042 LAN ip address
First question would be what type of vpn connection are you using to RV042? Next you said the RV042 isn't your default gateway , well the traffic most likely is getting into your network but doesn't know how to route back. Generally would ask for a topology if you have one so please repost, but going to take a guess at it... I have seen many try and put another router in the mix to supply remote access. Now depending on where the router is in your topology; this could be accomplish but the all computers within the local network will need to have static ip address to route back to the RV042 since it' not your default gateway.
Again i just gussing since i don't have a topology view!
First question is what kind of VPN? QuickVPN, IPSec VPN, etc.?
Is this the whole topology? is the default gateway for the 1.0 - 3.0 the 0.1 router? What is the Default Gateway for the PE router? Is it the rv042? then you should be able too as long as there is a route.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...