Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco RV120W installed behind another router & Quick VPN

Hello,

We have just installed a Cisco RV120W behind a third party firewall. All works correctly now, but we are struggling to get the Quick VPN clients connected. I have enabled port forwarding for PPTP & L2TP over IPSEC on the third party router, but still cannot connect (the RV120W was previously used as a primary router & worked perfectly). What ports do I need to open on the third party router to get this to work correctly?

Any urgent help would be appreciated!

Thanks.

4 REPLIES
New Member

Cisco RV120W installed behind another router & Quick VPN

Hello,

you need to forward ports to rv120:

4500 udp, 500 udp, 443 tcp, 60443 tcp.

cordially
New Member

Cisco RV120W installed behind another router & Quick VPN

Hi,

Thanks for your help, but that hasn't worked. Still unable to reach the RV120W!

Any other settings I'm missing?

Silver

Cisco RV120W installed behind another router & Quick VPN

Hi,

Qvpn doesn't support NAT-T - this is what you need when trying to connect via IPSec behind another router. If you need a vpn capable behind the another router - try using PPTP connection. you'll need to forward 1723 to RV120W router.

Jasbryan

Bronze

Cisco RV120W installed behind another router & Quick VPN

Hello,

Even though Cisco can't support this configuration you might want to look at ESP inspect rules on the edge router. When doing a normal NAT-T you need to setup the ASA or Pix to due a fixup or inspect for those ESP packets.

Just a guess

Hope that helps.

1047
Views
0
Helpful
4
Replies
CreatePlease login to create content