The only Small Business routers that I am aware of that has ipv6 firewall functionality are the SA500 Series routers. We have an SA540 and the ipv6 firewall functionality looks rather robust compared to the ipv6 firewall capabilities of the latest Cisco consumer routers (ie E4200, EA4500, etc.).
I have heard rumors that ipv6 firewall capabilities are coming to the RV220W (on the roadmap), but don't take my word for it. And even if the rumor is true, it could be 6+ months until it's production ready.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...