Hi,
I have a problem with setting advanced firewall on this router... Access list looks like this:
Priority 1 - Enable_HTTPS
Priority 2 - Enable_SMTP
Priority 3 - Enable_PPTP
Priority 4 - Disable ALL
Enable HTTPS rule looks like this:
IN interface: All WAN
Out Interface: ALL LAN
Source: 0.0.0.0/0.0.0.0
Destination: 0.0.0.0/0.0.0.0
TCP - Source/destination Port: 25
Action: Permit
Problem is when I enable this rule "Disable ALL", nothing is passing firewall by this 3 rules for enabling protocols.
What could I be missing out?
Thanks,
Ivan
