Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco SRP527w IPV6

Hi,

Tomorrow 2012-06-06 is ipv6 launch day, what about ipv6 on srp500 series ?

On product specification cisco wrote :

IPv6 (RFC 6204) ready

thanks

Alessio

  • Small Business Routers
Everyone's tags (2)
11 REPLIES
Cisco Employee

Cisco SRP527w IPV6

Hi,

We plan to release firmware supporting IPv6 for the SRP520W-U and SRP540W later this summer.

There will be no support for IPv6 for earlier SRP520W models.

Regards,

Andy

New Member

Cisco SRP527w IPV6

Hello,

I notice that there is a new 1.25 firmware release out now for the SRP527W-U but no mention of IPv6 in the release notes. I assume this means still no IPv6 yet, is it still planned for a future update?

Thanks,

Louis

New Member

Cisco SRP527w IPV6

Any update on when IPv6 will be available for SRP520 & SRP540 family of routers? I'm particularly interested for the SRP547W.

Gavin

New Member

Cisco SRP527w IPV6

waiting for ipv6 support as well.

Paolo

New Member

Cisco SRP527w IPV6

Anyone else get the feeling that we'll never see IPv6 for the SRP520 & SRP540 routers despite what Andrew said above?

Andrew, please update us on the status of IPv6.

Gavin

Cisco Employee

Cisco SRP527w IPV6

All,

Unfortunately, we have had to cancel the plans we had to introduce some IPv6 functionality for the SRP500 products.

Regards,

Andy

New Member

Re: Cisco SRP527w IPV6

Thanks for the update Andrew but this is extremely dissapointing news giving what we've been told over the past year or so.

What can we, your customers, do to get this decision reversed?

Will Cisco offer us discounts to upgrade to devices that will support IPv6?

Thanks

Gavin

Update: you can see my update on this saga to the Australian broadband consumer market here: http://forums.whirlpool.net.au/forum-replies.cfm?t=2086396

I did a reply and Cisco have

I did a reply and Cisco have creatively edited this support section. 

I have come here in search of IPv6 which Cisco asserted the platform was IPv6 ready meaning it WOULD support IPv6 when rolled out and I find out once more Cisco have over promised and under delivered a fact I know all to well as detailed in the attached PDF. 

Also I have included the PDF I relied upon when making my purchase decision, I note the new PDF from the Cisco website has been creatively altered to fit the none provision of IPv6 for the SRP547W, well for those of us who purchased on reliance of the information provided by Cisco in literature should expect IPv6 or for Cisco to buy back the SRP5XX series due to their miss information. 

**footnote, should this comment be removed or edited by a Cisco employee, I  will issue a press release, as the other entry was screen shot as will this be**

Cisco Employee

Elliot, with all due respect

Elliot, with all due respect to your frustration, this community is for technical support, not for editorial or press releases. If you have discrepancies with your purchase I advise you to talk to your reseller or as you've pointed out, your contact at Cisco. I apologize for your post being initially removed, but as mentioned, please keep your discussions to technical support. I will in turn forward your comments to Cisco Marketing for further follow-up

Sincerely,

Glenn

SMB Community Manager

1728
Views
42
Helpful
11
Replies
This widget could not be displayed.