Can I use the Cisco VPN client with the RVS 4000 router instead of the QuickVPN client? I read a post on another forum that the QuickVPN client will not work with another vpn client installed on the computer. I have to use the Cisco VPN client to access files at work and client locations. I also want to access my windows shares on a samba server located on my home network. The RVS 4000 is the router for my home network.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...