hello all, I made a new software for the users of the network, that software needs to extract data from the cmts using ftp regularly. The thing is when i scheduled the task to run, since then, the router is crashing. I linked the routine task and the crash together since the crashes started on the day the tasks started.
The task is to redirect the output of 2 commands, to a server on the network. it happens every 5 minutes.
the crash error is this:
CMTS uptime is 2 minutes System returned to ROM by error - a Software forced crash, PC 0x6093BB2C at 15:55:14 gmt Sat Sep 11 2010 System restarted at 15:57:19 gmt Sat Sep 11 2010 System image file is "disk1:ubr7200-ik9su2-mz.123-17a.BC.bin"
I can provide more info if u can help me figure out if the ftp routine is causing the crash, or if it could be something that's exausting the server.
the redirecting takes 10 seconds everytime it happens.
“Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here:
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...