I am trying to see if anyone knows of a way to automate connecting and disconnecting the QuickVPN Client. I searched a great deal around the web and through the Cisco forums but have not come up with anything. I can use anything- Scripting, command line switches, a batch file, task scheduler, ShellExecute commands from C++ or Delphi... I'm looking for anything simple or complicated that can automate the process of launching and connecting the client on a schedule. Since I haven't found anything I presume it can't be done, but I was hoping maybe someone would have an idea here. Thanks.
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...