Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring RV082 and Load balance

Hello everyone,

I'm asking for your help in order to configure my RV082. Here my problem :

The RV082 is between an ISA server 2006 and 2 Internet Box with Static WAN IP Address.

I didn't find the right configuration in order to have the 2 Internet connections simultaneously.

Here the network configuration :

ISA server 2006 :

External NIC IP : 10.0.101.253

Gateway : 10.0.101.250

RV082 :

Static Ip address : 10.0.101.250

WAN 1 : 81.89.63.61

WAN 2 : 10.0.101.1

Box Internet 1:

Static Ip Address : 10.0.101.254

Wan Ip : 81.89.63.61

Box Internet 2:

Static Ip Address : 10.0.101.251

Wan Ip : 89.158.92.61

I'm only able to have one Internet connection at a time and really can't find the right configuration to have the 2 connections up and add their bandwith. If needed i can give more details.

If someone could help me or give me some advice I would be really thankful.

1 REPLY
New Member

Re: Configuring RV082 and Load balance

I would suggest that you call into our Cisco Small Business Support Center (1-866-606-1866) and open up a case to assist you in

your configuration. We will need the serial number of the router when you call to check entitlement.

THANKS

1050
Views
0
Helpful
1
Replies