I noticed the daylight savings time settings require you to specify a specific day and month the daylight savings time starts and ends. The method daylight savings time is calculated in the US is a certain weekday on a certain week. Yes, I could enter the day every year, but that seems so silly, when Cisco could program the daylight savings time date the way I see every other piece of hardware, software, etc..
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...